1995 Ford Bronco/ F-Series Wheel Hubs and Bearings, Front Wheels, 4-Wheel Drive REMOVAL AND INSTALLATION

download
2. NOTE: F-350 4×4 no longer utilizes the snap ring, although F-250 4×4 vehicles still do. Remove the snap ring that retains the halfshaft (3A329) in the hub body assembly. 3. Remove the lockring seated in the groove of the front disc brake hub and rotor (1102). 4. Remove the body assembly from the front disc brake hub and rotor. If the body is difficult to remove, install two capscrews and pull the body assembly out of the front disc brake hub and roto For installation, follow removal procedures in reverse order. Tighten six Allen head capscrews to 4-6 Nm (35-53 lb-in). Do not pack the cap with grease. Excessive grease can cause excessive dialing effort